Articles
Practical guides and insights on industrial cooling, motion, and measurement.
Aug 9, 2026 · 12 min
Researching Root Canal Anatomy With Micro-CT: What CBCT Cannot Do, and Where NEOSCAN Fits
A root canal is not one straight tube but a branching three-dimensional system that differs between populations. Thai research has mapped it with CBCT for years; micro-CT answers a different question CBCT cannot — scanning the same tooth before and after treatment without destroying it.
Aug 9, 2026 · 10 min
What to Test in Raw Milk: A Nine-Point Checklist, and the Instruments That Answer Almost All of It From One Sample
Milk quality is not one number but a set of them, each answering a different question. Some set the price, some report herd health, some reveal that the milk was watered down or badly stored. Here is the full list — what to test, why, and with what.
Aug 9, 2026 · 9 min
Rack-Mount UPS for the Data Centre: Where Sanyo Denki SANUPS Differs
In a data centre, every percent a UPS loses does not stop at the electricity bill — it becomes heat you then pay again to remove. Here is why SANUPS hybrid topology and its ten-year lithium-ion batteries are the points worth comparing against other brands.
Aug 9, 2026 · 9 min
Seeing Inside Without Destroying the Sample: How NEOSCAN Micro-CT and Nano-CT Work
The traditional way to see inside something is to cut it open — one cross-section, and the sample is gone for good. Micro-CT changes that by building a 3D model from hundreds of X-ray views. Here is how it works, the difference between voxel and resolution that spec sheets gloss over, and how to pick a model.
Aug 9, 2026 · 9 min
Bentley Milk Analysers: The Principles Behind Reading Protein and Somatic Cells From One Sample
Milk composition and somatic cell count decide both the price paid and the grade awarded, yet they are measured by completely different principles. Here is how FTIR and flow cytometry each work, what separates a manual unit from a conveyor-fed one, and which dairy matrices these instruments can handle.
Aug 9, 2026 · 10 min
Compressed Air Leaks: The Bill You Pay Every Month Without Knowing, and How to Find It With the Plant Running
Compressed air is among the most expensive energy in a plant, yet leaks are invisible and machinery drowns out the sound. Acoustic imagers change that by painting the leak onto the live picture — a whole plant can be swept without stopping the line.
Aug 8, 2026 · 10 min
Testing an EV Charging Station Properly: What to Measure, and With What
A charging station that has been installed is not necessarily a charging station that works. Testing covers three areas — safety, communication, and delivered power. Here is how AC and DC chargers differ, what has to be measured, and which Fluke tool fits each job.
Aug 1, 2026 · 7 min
Splash-Proof Fans for Agriculture: Ventilating Heat and Humidity in Greenhouses and Drying Houses
Greenhouses and drying houses face heat, high humidity, water spray, and dust — so ordinary fans fail fast. This guide explains how to choose splash-proof, high-temperature, long-life fans for modern agri operators who need effective climate control in greenhouses and drying rooms.
Aug 1, 2026 · 4 min
Free Automation Spec-Selection & System Design by PMC Engineers
Stop guessing which motor, controller, or robot to use. Send us your requirements and PMC engineers will size, spec, and design your automation system to fit the job and the budget — free, no obligation.
Jul 13, 2026 · 6 min
Servo or Stepper Motor? A 5-Minute Guide to Choosing the Right One
Servo and stepper motors both work well, but picking the wrong type means overpaying or falling short on performance. This guide sums up the differences, how to decide by your actual application, and when to use each — with our engineers ready to help you pick, free.
Jul 13, 2026 · 7 min
Comet Dragonfly: 3D AI Rendering and Analysis for Research and Industry
CT, microscopy, and FIB-SEM produce enormous 3D image data — but the value is in reading it. Dragonfly is a deep-learning 3D rendering and analysis platform for research and industry, with special pricing available for education.
Jun 28, 2026 · 7 min
Codian Delta Robots on the Food Line: Fast, Clean Pick-and-Place with the Hygienic Design Series
Food production lines demand both speed and washdown-level hygiene. This guide explains why delta robots suit food pick-and-place, and why Codian’s Hygienic Design series is built to survive cleaning in food-manufacturing environments.
Jun 16, 2026 · 8 min
Piezo Nanopositioning: Moving at the Nanometer Scale for Lens and Semiconductor Manufacturing
In optical-lens and semiconductor manufacturing, even micron-level error is too much. This guide explains why piezo actuators are the heart of nanometer-scale positioning, how they differ from ordinary motors, which specs matter, and where they are used.
Jun 15, 2026 · 8 min
Galil Motion Control: The “Universal” Controller for Both Servo and Stepper — Its Advantages and Best-Fit Projects
Galil is an American motion controller known for its flexibility — controlling 1 to 8 axes, mixing servo and stepper motors in a single unit, and running standalone without a PC. This guide explains why it qualifies as a universal controller, its advantages, and which projects it suits best.
Jun 15, 2026 · 7 min
Vibration- & Shock-Resistant San Ace Fans: Why They Matter and When You Need Them
A fan is the part most likely to fail in a system, and in high-vibration or high-shock environments an ordinary fan fails far too soon. This guide explains why vibration- and shock-resistant San Ace fans matter, which applications truly need them, and which datasheet specs to check.
Jun 8, 2026 · 8 min
Linear Motors: The Heart of Micron-Level Precision — Understanding Direct Drive and Choosing the Right Jenny Science LINAX
Modern machines in semiconductor, medical, and electronics manufacturing demand micron-level precision — and the part that delivers it is the direct-drive linear motor. This guide explains how linear motors work, why they outperform screw- and belt-driven systems, the three distinct numbers hiding behind the word “precision,” and how to pick the right Jenny Science LINAX axis, with real specs for each model.
Jun 8, 2026 · 7 min
Reading San Ace Fan Model Numbers: What Every Character Means
A San Ace model number from Sanyo Denki is not random — every position systematically encodes a spec. Learn to read it and you can pin down frame size, voltage, control type, and thickness precisely, without opening a datasheet.
Jun 7, 2026 · 6 min
Force & Torque Testing for Packaging Quality Control
A cap too tight and customers cannot open it; too loose and the product leaks. Measuring force and torque as real numbers is the heart of quality control. This guide explains force vs torque, walks through bottle-cap torque testing, covers other QC applications for the Thai market, and points to the Mark-10 instruments we supply.
Jun 7, 2026 · 6 min
Choosing Cooling Fans for Electrical, EV-Charging & Server Cabinets
Trapped heat is the silent enemy of electronics. This guide covers how to choose cooling fans for electrical, EV-charging, and server cabinets — and why engineers worldwide trust San Ace fans.
Jun 7, 2026 · 8 min
A Dust-Free Home with Positive Pressure: Using San Ace Fans to Block PM2.5 and Keep the House Cool
Even with every door and window shut, PM2.5 keeps seeping into homes through tiny gaps. This guide explains the positive-pressure principle — using a fan to push filtered air into the house to keep dust out — plus how to design it to cool the home at the same time, and why San Ace fans suit the job.