Mark-10
American manufacturer of force and torque measurement instruments including force gauges and torque testers.
Specifications & options
Force capacity
0.5 N to 10 kN
Torque capacity
Up to 1,150 Ncm (100 lbFin)
Accuracy
+/-0.1% of full scale
Product families
Why choose Mark-10?
0.1% accuracy
Force and torque instruments deliver +/-0.1% of full-scale accuracy for reliable quality-control results.
High-speed sampling
Sampling rates up to 14,000 Hz capture peak force and break events that slower gauges miss.
Complete test systems
Gauges, test stands, grips, and software combine into integrated tensile, compression, and torque solutions.
Built for production
Rugged, configurable instruments serve QC, R&D, and production lines across virtually every industry.
Product series
Understand each series to find the right fit for your application.

Series 7 Digital Force Gauges
Advanced force gauges with 14,000 Hz sampling, 5,000-reading memory, and break and dual-peak detection for demanding applications.

TT03 Torque Gauges & Testers
Digital torque instruments measuring clockwise and counter-clockwise torque from 7 to 1,150 Ncm with 2,000 Hz sampling and USB output.

ESM Motorized Test Stands
Single-column motorized stands from 250 N to 10 kN for automated tensile, compression, peel, and spring testing.

TSF Manual Test Stands
Hand-wheel manual stands delivering up to 5 kN of push or pull force for spring, destructive, and integrity testing.

Grips, Fixtures & Sensors
An extensive range of tensile, compression, and peel grips plus remote force and torque sensors for building custom test setups.
Applications
Real micro/nano-CT scan examples across industries.

Medical Devices↗
Measure syringe plunger force, needle penetration, medical-packaging peel strength, and catheter tensile strength to ensure safe, consistent device performance.

Automotive↗
Verify connector insertion/extraction forces, fastener torque, and spring compression/tension so automotive components meet assembly and safety tolerances.

Aerospace↗
Run tensile and bend tests on structural coupons, wire-crimp pull-off, and switch activation checks to validate flight-critical components.

Electronics↗
Measure PCB component pull-off, connector insertion/withdrawal, and touchscreen activation force so electronic assemblies meet durability specs.

Manufacturing & QC↗
Perform tensile, compression, peel, and bend tests across production lines to verify material strength, joint integrity, and process consistency.

Packaging↗
Measure seal peel strength, blister-pack opening force, and film coefficient of friction to confirm packaging integrity and shelf performance.

Food & Beverage↗
Test cap opening/closing torque, foil-seal peel strength, and container top-load resistance to ensure food and beverage packaging is safe and consumer-ready.

Springs↗
Measure spring torque profiles and free/working length to verify spring rates and confirm compliance with design specifications.
Products by Mark-10
Series 7 Digital Force Gauges

Mark-10 Series 5 Force Gauge
High-accuracy digital force gauge for tension & compression testing
→
Mark-10 M7-5 Digital Force Gauge
High-speed portable gauge for precision tension and compression testing.
→
Mark-10 M7-200 Digital Force Gauge
Heavy-duty Series 7 gauge for up to 200 lbF tension or compression.
→
Mark-10 M5-200 Digital Force Gauge
Versatile Series 5 plug-and-test gauge with 7,000 Hz sampling.
→TT03 Torque Gauges & Testers

Mark-10 MTT03-12 Digital Torque Gauge
Compact digital torque gauge with 2,000 Hz sampling and Jacobs chuck.
→
Mark-10 MTT03-100 Digital Torque Gauge
High-capacity TT03 torque gauge up to 100 lbFin for lab and production.
→
Mark-10 MTT01-12 Cap Torque Tester
Dedicated cap torque tester with integrated chuck for bottle closures.
→ESM Motorized Test Stands

Mark-10 ESM303 Motorized Test Stand
Single-column motorized stand for tension and compression up to 300 lbF.
→
Mark-10 ESM1500 Motorized Test Stand
High-capacity dual-column motorized stand rated to 1,500 lbF.
→
Mark-10 F505H-EM Motorized Force Tester
Current-generation EasyMESUR motorized tester up to 500 lbF.
→TSF Manual Test Stands

Mark-10 ES30 Manual Test Stand
Lever-operated manual stand with 200 lbF capacity and 13-inch travel.
→
Mark-10 TSA750 Manual Test Stand
Rack-and-pinion hand-wheel stand rated to 750 lbF.
→
Mark-10 TSF Manual Test Stand
Heavy-duty hand-wheel stand for precision testing up to 1,000 lbF.
→Grips, Fixtures & Sensors

Mark-10 G1061 Wedge Grips
Self-tightening wedge grips for tensile testing up to 1,200 lbF.
→
Mark-10 G1074 Standard Vise Grip
Compact vise-style grip for secure clamping of irregular samples.
→
Mark-10 G1010 Jacobs Chuck Pin Vise Grips
Jacobs chuck pin vise for precise grip of small cylindrical specimens.
→Need a specific model or spare part?
Chat with our team on LINE and we’ll help you find the right one.

