Mark-10 High : quality Force-Torque Gauge

 

Mark-10 is a designer and manufacturer of force gauges, torque gauges, test stands and gripping fixtures. Our force and torque gauges and measurement systems are used by quality control, engineering, and manufacturing professionals in virtually every industry around the world to help assess and ensure product quality.

 

 

Mark-10 เป็นผลิตเครื่องวัดแรงกด แรงดึง และแรงบิด ระบบดิจิตอลจากประเทศอเมริกา โดย Mark-10 ยังออกแบบตัว fixtures ไว้หลากหลายแบบ เพื่อให้เหมาะสำหรับการจับยึดชิ้นงานที่หลายหลาย

 

 

นอกจากนี้ Mark-10 เองได้ออกแบบให้สามารถนำข้อมูลส่งผ่านไปยังคอมพิวเตอร์หรือเครื่องมืออื่นเพื่อนำใสัญญาณไปใช้งานอื่น ๆ ได้ ไม่ว่าจะเก็บข้อมูลเข้าคอมพิวเตอร์ หรือการนำไป triger ให้ทำกระบวนการอื่นต่อไป

 

 

FORCE & TORQUE TESTERS

Mark-10 Force and Torque Testers consist of several components, each of which are available separately. A wide range of each component is available, thus enabling the configuration of a system suited to the requirements of specific applications. Click on any of the testers below to learn more.

 

 

---

Tensile Testers	Spring Testers	Peel Testers
Torque Testers	Pull Testers	Compression Testers

 

 

 

 

 

 

  Catalog และ ข้อมูลเพิ่มเติม  

 

 

 

 

 

 

 

 

 

 

 

 

 

             ด้วยมาตราฐานความเที่ยงตรง ในการทดสอบของ Mark-10 นี่เอง ทำให้ Mark-10  ถูกใช้อย่างแพร่หลาย ในส่วนของการตรวจสอบคุณภาพ สินค้า เช่น อุตสหกรรม รถยนต์, อุตสหกรรม อาหาร, ยา และ อุสาหกรรม ปัจจุหีบห่อ รวมถึง ชิ้นส่วนอิเล็กทรอนิกส์ อีกด้วย

 

Force gauge รุ่นต่าง ๆ

 
 

	Series 7 Force Gauges 14,000 Hz sampling rate Continuous data capture with 5,000-data point buffer and bulk output Break detection Programmable footswitch sequencing ±0.1% accuracy From $1,595 » More info		Series 5 Force Gauges 7,000 Hz sampling rate USB, RS-232, Mitutoyo, and analog outputs ±0.1% accuracy 1,000 point data memory and statistics Capacities to 2,000 lbF (10 kN) From $995 » More info
	Series 4 Force Gauges 3,000 Hz sampling rate USB, RS-232, Mitutoyo, and analog outputs ±0.2% accuracy 50 point data memory and statistics Reversible housing and display From $795 » More info		Series 3 Force Gauges 2,000 Hz sampling rate Ultra-compact form factor USB output ±0.3% accuracy Reversible housing and display From $625 » More info
	Series 2 Force Gauges 500 Hz sampling rate Ultra-compact form factor ±0.5% accuracy Reversible housing and display $415 » More info		Series MG Force Gauges Compact size Selectable units of measurement ±0.5% accuracy Reversible display From $545 » More info
* Sensor not included	7i Professional Force / Torque Indicator 14,000 Hz sampling rate Continuous/single data point capture for 5,000 readings, with statistics Footswitch command string Break detection and auto output/zero $1,445 » More info	* Replaces Model BGI. Sensor not included.	Advanced 5i Force / Torque Indicator 7,000 Hz sampling rate Sensor and keypad password protection USB, RS-232, Mitutoyo, and analog outputs ±0.1% accuracy 1,000 point data memory and statistics $895 » More info
* Sensor not included	Advanced 3i Force / Torque Indicator 2,000 Hz sampling rate Ultra-compact form factor USB output ±0.2% accuracy $545 » More info

 

 ตารางเปรียบเทียบสำหรับรุ่นต่าง ๆ  : comparisonchart-forcegauges    or              force gauge comparison.

 

---

   

 Torque gauge รุ่นต่าง ๆ

 

 

* Replaces Series MGT	Series TT03 Torque Gauges Dedicated remote torque sensor with Jacobs chuck Compact size USB output ±0.5% accuracy Capacities from 10 ozFin to 100 lbFin $1,175 to $1,275 » More info	* Replaces Series CTA	Series TT01 Cap Torque Testers USB, RS-232, Mitutoyo, analog, set point outputs 1,000 point data memory and statistics Auto output / data storage / zero upon bottle cap removal ±0.3% accuracy Capacities from 12 to 100 lbFin $1,295 » More info
* Replaces Series STA	Series TT02  Torque Tool Testers Calculates first and second peaks 1,000 point data memory and statistics USB, RS-232 Mitutoyo, analog, set point outputs Auto output / data storage / zero upon bottle cap removal ±0.3% accuracy Capacities from 12 to 100 lbFin $1,195 » More info	* Replaces Series MGTC	Series TT03C Cap Torque Gauges Simple hand operation Portable design Dedicated remote torque sensor with Jacobs chuck and cap grip USB output ±0.5% accuracy Capacities from 12 to 100 lbFin $1,425 » More info
	Series TT05 Torque Testers Threaded hole grid permits fixture mounting flexibility First / second peak detection 1,000 point data memory and statistics USB, RS-232 Mitutoyo, analog, set point outputs Break detection ±0.3% accuracy Capacities from 12 to 100 lbFin $1,195 » More info
* Sensor not included	7i Professional Force / Torque Indicator 14,000 Hz sampling rate Continuous/single data point capture for 5,000 readings, with statistics Footswitch command string Break detection and auto output/zero $1,445 » More info	* Replaces Model BGI. Sensor not included.	Advanced 5i Force / Torque Indicator 7,000 Hz sampling rate Sensor and keypad password protection USB, RS-232, Mitutoyo, and analog outputs ±0.1% accuracy 1,000 point data memory and statistics $895 » More info
* Sensor not included	Advanced 3i Force / Torque Indicators 2,000 Hz sampling rate Ultra-compact form factor USB output ±0.2% accuracy $545 » More info

 

 ตารางเปรียบเทียบสำหรับรุ่นต่าง ๆ : torque gauge comparison.

---

 Sensor

 

FORCE SENSORS
* Replaces Series SS	Series R01 Compression and tension testing Threaded holes for attachments Capacities from 50 to 10,000 lbF (250 N to 50 kN)	* Replaces Series SBC	Series R02 Compression testing Compact and rugged design Capacities from 100 to 10,000 lbF (500 N to 50 kN)
* Replaces Series SSM	Series R03 Inline compression and tension testing Threaded holes for attachments Capacities from 0.25 to 100 lbF (1 to 500 N)	* Replaces Series SJR	Series R04 Compression and tension testing Threaded holes for attachments Miniature design Capacities from 0.25 to 100 lbF (1 to 500 N)
* Replaces Series SHP	Series R05 Push / pull testing Threaded hole for attachments Ergonomic handles 500 lbF (2500 N) capacity
TORQUE SENSORS
* Replaces Series STJ	Series R50 General torque testing Jacobs chuck grip Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm) Bi-directional	* Replaces Series STH	Series R51 General torque testing Interchangeable attachments Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm) Bi-directional
* Replaces Series STC	Series R52 General torque testing Mounting holes for bench mounting Bi-directional Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm)	* Replaces Series STB/STBA	Series R53 Closure, bottle cap testing Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm) Bi-directional
	Series R54 General torque testing Bi-directional Capacities from 20 lbFin to 5,000 lbFin (220 Ncm to 550 Nm)		Series R55 General torque testing Bi-directional Capacities from 20 lbFin to 5,000 lbFin (220 Ncm to 550 Nm)

 

---

 

 

 

Basic Motorized Force Test Stands

 

 

---

Force Capacity     lb [N]     Max. Travel1     in [mm]     Speed Range     in/min [mm/min]     Daylight2     in [mm] Included Accessories4 ESM 200 [1000] 13 [330] 0.5 - 13 [13 - 300]   14 [356]3     Tool kit, ext. rod, sm. hook, med. hook, #10-32 coupler, 2" compression plate ESMH 100 [500] 12 [305] 0.2 - 50 [5 - 1270] 13 [330] (12 [305] w/optional travel display)       TSFM500 / TSFM500H           500 [2200] 4 [102] 0.2 - 5.5 [5 - 140] TSFM500:   14 [356]3       TSFM500H:   16.5 [419]3     Tool kit, sm. hook, med. hook, lg. hook, extra lg. hook, 1/2-20F adapter plate, 2" and 3" compression plates, couplers (#10-32 and 5/16-18)

 

 

 

Advanced Motorized Force Test Stands

 

 

---

 

The specifications Force Capacity, Max. Travel, Loading Method, Daylight, and Included Accessories for the test stand models ESM-DC, ESMH-DC, and TSFM500-DC/TSFM500H-DC correspond to the basic versions of these test stands presented in the table above..

	Speed Range     in/min [mm/min]	Programmable Travel Limits	Travel Display	Controller Features (Cycling, PC control, etc.)	PC Control	Limit Switches
ESM301	0.02 - 45 [0.5 - 1100]	Yes	Internal, RS-232 output	Optional	Full	Included
ESMH-DC	0.2 - 50 [5 - 1270]	N/A	External, Mitutoyo output	Included	All functions, except travel measurement
TSFM500-DC/ TSFM500H-DC	0.01 - 6 [0.2 - 150]					Optional

 

 

 

 

Manual Force Test Stands

 

 

---

	Force Capacity     lb [N]	Max. Travel1     in [mm]	Loading Method	Travel Rate     in [mm]	Daylight2     in [mm]	Included Accessories4
ES10 / ES20	100 [500]	9 [229]	Lever	1.05 [26.7] / lever rev.	9 [229]	---
			Top-mounted hand wheel	0.06 [1.5] / wheel rev.
ES05	30  [150]	1.5 [38]	Spring-loaded lever	---	8 [203]3	---
ES30	200 [1000]	13 [330]	Side-mounted hand wheel	0.05 [1.3] / wheel rev.	14 [356]3	Tool kit, ext. rod, sm. hook, med. hook, #10-32 coupler, 2" compression plate
TSA / TSAH	750 [3750]	w/stops: 2.75 [70] w/o stops: 6 [152]	Rack & pinion, lever can be positioned in 30° increments	3.00 [76.2] / lever rev.	TSA:   10.5 [267]3     TSAH:   14.5 [368]3	Tool kit, med. hook, lg. hook, 2" compression plate
TSB	100 [500]	w/stops: 2.75 [70] w/o stops: 6 [152]	Rack & pinion, lever can be positioned in 30° increments	3.00 [76.2] / lever rev.	13 [330]	---
TSC / TSCH	1000 [5000]	3.5 [89]	Inline hand wheel	0.10 [2.5] / wheel rev.	TSC:   10 [254]3     TSCH:   13 [330]3	Tool kit, med. hook, lg. hook, extra lg. hook, 1/2-20F adapter plate, 2" compression plate
TSF / TSFH	1000 [5000]	4 [102]	Side-mounted hand wheel	0.013 [0.34] / wheel rev.	TSF:   14 [356]3       TSFH:   16.5 [419]3	Tool kit, sm. hook, med. hook, lg. hook, extra lg. hook, 1/2-20F adapter plate, 2" and 3" compression plates, couplers (#10-32 and 5/16-18)

 

 

 

 

Torque Test Stands

 

 

---

	Torque Capacity     lbin [Nm]	Speed Range	Controller Features (Cycling, PC control, etc.)	Angle Indication	Programmable Angle Travel Limits	Daylight2     (w/STJ torque sensor)     in [mm]
TST / TSTH	100 [11.3]	12° / wheel rev. (manually operated)	N/A	Dial, optional digital angle display (no data output)	N/A	TST:   15 [381]3     TSTH:   16 [406]3
TSTM / TSTMH		0.3-8.6 RPM [4-52°/s]				TSTM / TSTM-DC:   13 [330]3       TSTMH / TSTMH-DC:   16 [406]3
TSTM-DC/ TSTMH-DC		0.01-15 RPM [0.05-90°/s]	Included	Dial, integrated digital angle display with RS-232 output	Yes

All torque test stands include a tool kit.

 

 

 

 Origin    : USA   

 

 

 

 

 

 

 

Address  : 11 Dixon Avenue  Copiague, NY 11726 

 

 

Website : http://www.mark-10.com/